HOW TO

HOW TO APPLY NAILS

Using nail tabs:

Step 1 - If needed, file and clean your nails of any nail varnish or oil with an acetone based varnish remover.

Step 2 - It is recommended that if you have smooth natural nails to GENTLY file or buff the tops of your nails*. This will help to keep the nails on for longer and prevent them from popping off.

Step 3 - Make sure the nails fit perfectly, if needed file down the sides until perfect.

Step 4 - With the glue tabs still on the film, place over your nail to determine the size, if the size is slightly big, cut it down with nail clippers, once it's perfect peel off the film and place on your nail, and press down until fully adhered, then peel of the backing. Once the backing is off do not touch the tab, the natural oils in your skin could make it become non tacky.

Step 5 - Making sure the nail is straight, gently place it on, then press down. Continue and repeat until you have a full set of beauties!

HOW TO REMOVE NAILS

CATUION: To remove nails I recommend you DO NOT use nail polish remover (acetone or non acetone) as it will soak off the design.

For nails applied with glue tabs:

Step 1 - Soak nails in warm to hot water (remember the temperature must be bearable)

Step 2 - Carefully use fingertip to lift the sides of the nail, they should easily start to lift. If they don’t continue soaking until they come free from the nail.

Step 3 - Once off peel off the glue tabs from the false nails ready for another use.

*Anouska Anastasia nails does not hold responsibility for damaged nails. Take caution when filing or buffing the nails, be gentle. If using a nail file use a medium or fine grit emery board. If using a buffer use the coarse side only, do not shine nail.